Plate and Gasket Heat Exchanger

Plate and Gasket Heat Exchanger

Introduction
Plate and gasket heat exchanger consists of a number of corrugated plates. The plates are mounted between a fixed and movable pressure plate, positioned by an upper guide bar and lower carrying bar, and compressed by several tightening bolts. The fluid is fed into the plate package via connections to the fixed and movable pressure plates. The arrangement of plates create two separate channels, enabling two fluids to flow past and between each other without physical contact, leaving from the equipment again through connections in pressure plates. Plates with different patterns can be mixed in heat exchanger in order to achieve optimum efficiency at given parameters. By installing muti-pass arrangement plates in plate heat exchanger, it can also handle more than two types of fluid. 


Application Range
AU, AC, AS, AP Series
Connection Size: DN32 - DN500
Max. Flow Rare: 4500m3/h
Max. Load: 60MW  
Temperature Approach: Under 1℃ 
(Heat Recovery)
Thickness: 0.4, 0.5, 0.6, 0.7mm
Max. Design Pressure: 26Bar
Max. Design Temperature: ≤180℃ 
Material of Gasket: NBR, HNBR, EPDM, HEPDM, VITON
Material of Plates: AISI304, 316, 316L, Titanium, Has Alloy Nickel, SMO254


Main Technical Data of Plate Heat Exchanger
Plate Model Plate (mm) Plate (mm) Heat Transfer Area Per Plate (m2) Max. Transfer Area (m2) Max. Capacity (m3/h) Max. Testing Pressure (Mpa) Gap Depth Plate (mm) Connection Dimension (mm)
AU3 165 464 0.039 5 14.50 2.00 2.600 32 DN32
AU5 260 695 0.11 15 35.30 2.00 3.00 50 DN50
AU8 349 832 0.16 50 90.00 3.13 3.20 80 DN80
AU10L1 405 896 0.24 70 141.00 3.13 3.60 100 DN100
AU10L2 405 1218 0.39 110 141.00 3.13 3.60 100 DN100
AU15M 524 1400 0.50 170 318.00 3.13 3.80 150 DN150
AU15L1 500 1314 0.43 170 318.00 3.13 3.80 150 DN150
AU15L2 500 1666 0.65 350 318.00 3.13 3.80 150 DN150
AU20 695 1760 0.95 400 565.00 3,13 3.80 200 DN200
AN5 260 695 0.13 20 35.30 2.00 2.00 50 DN50
AN10 405 1218 0.38 150 141.00 3.13 2.60 100 DN100
AN15L1 500 1244 0.43 200 318.00 3.13 2.60 150 DN150
AC65 375 1500 0.55 300 318.00 3.13 2.60 100 DN150
AN15L2 500 1666 0.65 400 318.00 3.13 2.60 150 DN150
AN20 610 1800 0.98 600     2.00 200 DN200
AN25L1 740 1980 1.13 700 883.00 3.13 2.60 250 DN250
AN25L2 740 2262 1.35 1000 883.00 3.13 2.60 250 DN250
AN30L1 870 1524 0.71       3.20 300 DN300
AN30L2 870 2010 1.17       3.20 300 DN300
AN30L3 870 2496 1.63       3.20 300 DN300
AN30L4 870 2982 2.09 1300 1017.00 2.00 3.20 300 DN300
AN35L1 995 1530 0.71       3.80 350 DN350
AN35L2 995 1874 1.09       3.80 350 DN350
AN35L3 995 2218 1.47       3.80 350 DN350
AN35L4 995 2562 1.85 1700 1730.00 2.00 3.80 350 DN350
AN40L1 1219 1755 1.12       3.80 400 DN400
AN40L2 1219 2215 1.75       3.80 400 DN400
AN40L3 1219 2675 2.38       3.80 400 DN400
AN40L4 1219 3135 3.01 2200 2261.00 2.00 3.80 400 DN400
AN45L1 1219 1865 1.09       3.80 450 DN450
AN45L2 1219 2325 1.72       3.80 450 DN450
AN45L3 1219 2785 2.35       3.80 450 DN450
AN45L4 1219 3245 2.98 2800 2861.00 2.00 3.80 450 DN450
AN50L4 1550 3991 3.15 3500 3532.00 2.00 3,80 500 DN500
AS6 335 513 0.08 10 60.00 2.00 4.00 65 DN65
AS20 610 960 0.28 80 565.00 2.00 3.80 200 DN200
AS25 750 1146 0.45 120 883.00 2.00 3.80 250 DN250
 

External Diagram of Plate Heat Exchanger


Main Dimension of Plate Heat Exchanger
Model B H LMIN LMAX LC BC h1 h2 b1 bf DN M
AU3 225 525 272 425 237 - 390 75 70 390 95 500 DN25 M16
AU5 334 840 630 1030 580 - 980 294 133 574 142 800 DN50 M20
AU8 440 1025 875 2025 795 - 1945 375 191 688 206 800 DN80 M20
AU10L1 514 1160 875 2025 795 - 1945 414 240 721 235 1000 DN100 M22
AU10L2 514 1485 885 2035 805 - 1955 414 240 1045 235 1000 DN100 M22
AU15M 634 1695 1155 2655 1075 - 2575 474 290 1170 300 1000 DN150 M22
AU15L1 620 1549 1150 2650 1070 - 2570 460 290 1016 285 1500 DN150 M22
AU15L2 620 1971 1150 2650 1070 - 2570 460 290 1448 285 1500 DN150 M22
AU20 860 2118 1175 3475 1090 - 3390 680 365 1466 412 1500 DN200 M24
AN5 334 840 630 1030 580 -& 980 294 133 574 142 800 DN50 M20
AN10 514 1485 885 2035 805 - 1955 414 240 1045 235 1000 DN100 M22
AN15L1 620 1549 1150 2650 1070 - 2570 460 290 1016 285 1500 DN150 M22
AN15L2 620 1971 1150 2650 1070 - 2570 460 290 1448 285 1500 DN150 M22
AN25L1 900 2411 1495 3495 1410 - 3410 700 400 1668 428 1500 DN250 M24
AN25L2 900 2693 1495 3495 1410 - 3410 700 400 1950 428 150 DN250 M24
AN30L4 1010 3432 1545 3545 1420 - 3420 850 440 2592 490 1500 DN300 M24
AN35L4 1240 3072 1515 3515 1430 - 3430 850 474 2114 565 1500 DN350 M24
AN40L4 1373 3620 1505 3505 1320 - 3420 1143 471 2648 739 1500 DN400 M24
AN45L4 1440 3760 1505 3505 1420 - 3420 1210 504 2723 683 1500 DN450 M24
AN50L4 1540 3860 1505 3505 1420 - 3420 1210 504 2723 683 1500 DN500 M24
AS6 415 705 645 1045 595 - 995 375 173 380 203 800 DN65 M20
AS20 764 1317 1155 3455 1075 - 3375 604 350 697 347 1000 DN200 M22
AS25 904 1502 1175 3475 1080 - 3380 674 380 814 420 1500 DN250 M24